=========================================
L U A   S N A P F L A P   M I X   D E M O
=========================================

Requirements
============
Any transmitter running OpenTx (must be built with 'Lua' option)

Installation
============
Copy the snapflap script to \SCRIPTS\MIXES folder on SD card
Add LuaSnapDemo setup to tx, and make it the default model
In the Custom Scripts menu, select snp500
Open the script configurator, set CP1=10, CP2=11

Operation
=========
Pull back on Ele stick, monitor snapflap on CH3. 
Alter deadband inflection points with S1 and S2.

Channels
========
CH3: flap channel
CH6: elevator channel
CH10: defines Pt 1 on snap curve, adjusted by S1
CH11: defines Pt 2 on snap curve, adjusted by S2

Curves
======
CV1:Lu1 - end points define adjustment range of S1
CV2:Lu2 - end points define adjustment range of S2


